Filter
Top Products
Agilent N5161A/62A/81A/82A/83A MXG Signal Generators User’s Guide 131
8 Basic Digital Operation (Option 651/652/654)
NOTE For the N5162A the softkey menus and features mentioned in this guide are only available
through the Web–Enabled MXG or SCPI commands. For information on the Web-Enabled
MXG, refer to the Installation Guide, the Programming Guide, and to the SCPI Command
Reference.
Before using this information, you should be familiar with the basic operation of the signal generator.
If you are not comfortable with functions such as setting power level and frequency, refer to Chapter
3, “Basic Operation,” on page 41 and familiarize yourself with the information in that chapter.
The features described in this chapter are available only in vector signal generators with Option 651,
652, or 654.
• Waveform File Basics on page 132
• Storing, Loading, and Playing a Waveform Segment on page 134
• Waveform Sequences on page 137
• Saving a Waveform’s Settings & Parameters on page 141
• Using Waveform Markers on page 147
• Triggering a Waveform on page 164
• Clipping a Waveform on page 171
• Scaling a Waveform on page 180
• Setting the Baseband Frequency Offset on page 186
• I/Q Modulation on page 190
• Using the Equalization Filter on page 196
• Using Finite Impulse Response (FIR) Filters in the Dual ARB Real-Time Modulation Filter on page
198
• Modifying a FIR Filter Using the FIR Table Editor on page 204
• Setting the Real-Time Modulation Filter on page 208
• Multiple Baseband Generator Synchronization on page 209
• Waveform Licensing for Firmware Version ≥ A.01.50 on page 220
• Waveform 5–Pack Licensing (Options 221–229) for Firmware Version < A.01.50 on page 228
See Also:
• Adding Real–Time Noise to a Dual ARB Waveform on page 241