Filter
Top Products
6/08 ST 3000 Release 300 and SFC Model STS103 User’s Manual 57
5.4 Changing Mode of Operation
Procedure
If you need to change your transmitter’s mode of operation, use the
steps in Table 19 to change the mode from analog to digital or digital to
analog. If you have an optional Local Smart Meter, you can readily tell
your transmitter’s present mode of operation by checking whether the
ANALOG indicator on the meter display is lit or not.
Attention: Only transmitters with Option DE can be set to DE Mode.
Table 19 Changing Mode of Operation.
Step Press Key Read Display or Action Description
1
^
SHIFT
A <–>DE
Q
LIN T ØØØDP S
FT–SHI
3
?
A/ DE
HN T OCG DE
ST 3ØØØ
OR
?
A/ DE
HN T OCG AN
ST 3ØØØ
ALOG
Initiates shift key selection. Note that
transmitter tag number ST 3000 in
top row is used for example
purposes only.
Asks if you want to change to DE
(digital) mode. If you want to change
mode, go to Step 2. If you do not
want to change mode, press [
CLR]
key to exit function.
Asks if you want to change to
analog mode. If you want to change
mode, go to Step 2. If you do not
want to change mode, press [
CLR]
key to exit function.
2
NON-VOL
ENTER
(Yes)
?
A/ DE
RE YOASU
ST 3ØØØ
REU
Prompt asks for confirmation of
mode change.
3
NON-VOL
ENTER
(Yes)
A/ DE
FC WOSIN
ST 3ØØØ
G
.
RK ..
R
A/ DE
X
ST 3ØØØ
MTDE
OR
A/ DE
NA G
ST 3ØØØ
XMLO TRA
LIN DP
.Y. .READ
T ØØØS3
Message exchange is working.
Mode of operation is now DE
(digital).
Mode of operation is now analog.
Ready for next function.
Continued on next page