Filter
Top Products
28 ST 3000 Release 300 and SFC Model STS103 User’s Manual 6/08
4.2 Mounting ST 3000 Transmitter, Continued
Bracket mounting,
continued
Table 9 Mounting ST 3000 Transmitter to a Bracket, continued
Step Action
3
Align appropriate mounting holes in transmitter with holes in bracket
and secure with bolts and washers provided.
If transmitter is … Then …
DP type with double ended use alternate mounting
process heads and/or holes in end of heads.
remote seals
GP and AP with single- use mounting holes in side
ended head of meter body.
In-line GP and AP use smaller “U” bolt
(STGxxL and STAxxL) provided to attach meter
body to bracket.
See figure below.
Dual-head GP and AP use mounting holes in end
of process head.
Example – Inline model transmitter mounted to optional angle
mounting bracket.
Inline models
Meter Body
Smaller
“U” bolt
Use bracket for
hexagonal meter body
NOTE: If the meter body is hexagonal, you must use the additional
bracket supplied. If meter body is round, discard the
bracket.
Continued on next page