Filter
Top Products
6/08 ST 3000 Release 300 and SFC Model STS103 User’s Manual 27
4.2 Mounting ST 3000 Transmitter, Continued
Dimensions
Detailed dimension drawings for given transmitter series and types are
listed in the back of the Installation Guide (Part number 34-ST-33-39)
for reference. Note that abbreviated overall dimensions are also shown
in the Specification Sheets for the given transmitter models.
This section assumes that the mounting dimensions have already been
taken into account and the mounting area can accommodate the
transmitter.
Bracket mounting
Table 9 summarizes typical steps for mounting a transmitter to a
bracket.
Table 9 Mounting ST 3000 Transmitter to a Bracket
Step Action
1
If you are using an… Then…
optional mounting bracket go to Step 2.
existing mounting bracket go to Step 3.
2
Position bracket on 2-inch (50.8 mm) horizontal or vertical pipe, and
install “U” bolt around pipe and through holes in bracket. Secure with
nuts and lockwashers provided.
Example - Angle mounting bracket secured to horizontal or vertical
pipe.
Horizontal Pipe
Mounting
Bracket
Nuts and
Lockwashers
Nuts and
Lockwashers
U-Bolt
U-Bolt
Mounting
Bracket
Vertical Pipe
Continued on next page