Filter
Top Products
6/08 ST 3000 Release 300 and SFC Model STS103 User’s Manual 29
4.2 Mounting ST 3000 Transmitter, Continued
Bracket mounting,
continued
Table 9 Mounting ST 3000 Transmitter to a Bracket, continued
4
Loosen set screw on outside neck of transmitter one full turn. Rotate
electronics housing a maximum of 180 degrees in left or right
direction from center to the position you require and tighten set screw
(13 to 15 lb-in/1.46 to 1.68 N
.
m).
Example - Rotating electronics housing.
Set Screw
Electronics
Housing
180 degrees
max.
180 degrees
max.
ATTENTION
The metric socket head wrench kit supplied with the
SFC includes 2.5, 3, and 4mm size wrenches. You will need the
4mm size wrench for the outside set screw.
Continued on next page