Filter
Top Products
ST 3000 Release 300 and SFC Model STS103 User’s Manual 6/08
152
8.2 Accessing Operation Data
Summary
You can access this data relevant to the operation of the transmitter
using an SFC.
• Input
• Output
• Span
• Upper Range Limit
• Status
• Failsafe Output Direction
• Sensor Temperature
• Scratch Pad Messages
• PROM Serial Number
Procedure
Table 46 summarizes the keystrokes required to access given operation
data from the transmitter using an SFC. These keystrokes assume that
SFC communications have been established with the transmitter by
pressing the [ID] key. The values shown in displays are for example
purposes only.
Table 46 Summary of Keystrokes for Operation Data Access
IF you want to view… THEN use these keystrokes…
the present input pressure,
which is updated every six
seconds
^
SHIFT
FT–SHI
LIN DP T 011P3
INPUT
J
OUT-
PUT
PTIN P 30111UT
FC WOSING
.
RK ..
PTINP 3Ø111UT
.37Ø21
"
H2O_39F
the present transmitter
output in percent, which is
updated every six seconds
INPUT
J
OUT-
PUT
PTOUT 30111P
FC WOSING.RK ..
%5. 7
PTOUT 30111P
64
Continued on next page