Filter
Top Products
ST 3000 Release 300 and SFC Model STS103 User’s Manual 6/08
140
7.8 Pressure or Liquid Level Measurement with GP
Transmitter
Procedure
The procedure in Table 43 outlines the steps for starting up a gauge
pressure (GP) type transmitter in a pressure or liquid level measurement
application. Refer to Figures 43 and 44 for the piping arrangement
identification and Figure 38 for typical SFC and meter connections.
Figure 43 Typical Piping Arrangement for Pressure Measurement with GP Type Transmitter
Block-off
valve no.2
Gauge
Pressure
Transmitter
Union
Block-off
valve no.1
Pipe
Plug
Process
Tee connector
Figure 44 Typical Piping Arrangement for Liquid Level Measurement with GP Type
Transmitter
Tap location at the minimum
level to be measured
Gauge
Pressure
Transmitter
Block-off
valve
To Process Head
connection on
meter body
Continued on next page