Filter
Top Products
6/08 ST 3000 Release 300 and SFC Model STS103 User’s Manual 161
8.5 Saving and Restoring a Database, Continued
Procedure, continued
Table 49 Saving and Restoring a Database, continued
Step Press Key Read Display or Action Description
11
NON-VOL
ENTER
(Yes)
ATEASAV D
FC WOSING
.
RK ..
ATEASAV D
AT SDEDAVA
TES RE/ E O
TADSAVE ?A
SAV R
Answer yes to prompt and initiate
database save function.
Database saved to SFC HOLD
memory.
12
Disconnect SFC and connect it to loop
wiring for transmitter whose database is
to be restored.
ATTENTION
Be sure to leave SFC
power on. The saved database will be
lost if the SFC power is turned off.
Be sure to put analog loop into
manual mode.
13
DE READ
A
ID
TA ON.G
?TRIPS SECURED?
Be sure any switches that may trip
alarms or interlocks associated with
analog loop are secured or turned
off.
14
NON-VOL
ENTER
(Yes)
TA ON.G
SFC WORKING.. .
LIN AG NO.DP T
_
Confirm that “TRIPS” are secured
and establish communications with
sample transmitter without a tag
number (ID) whose database is to
be restored.
15
B
CONF
NGO IST C F
ITYORMCONF ?
Call up first configuration parameter.
16
NEXT
H
CONF I G
CMe ntr o ?ef
ST
i
g
Call up next configuration
parameter.
17
NEXT
H
NGO IST C F
TEMORSENS ?P
Call up next configuration
parameter.
18
NEXT
H
NGO IST C F
7751SER# 21ØØØ
Call up next configuration
parameter.
Continued on next page