Filter
Top Products
6/08 ST 3000 Release 300 and SFC Model STS103 User’s Manual 233
Appendix A – Table III Options in Model Number
A.1 Table III Options Reference
Codes and
descriptions
The following table lists available Table III options alphabetically and
numerically by their codes and gives a brief description of the options.
Note that restrictions do apply based on other as-built transmitter
characteristics and some options are mutually exclusive.
If Code is. . . Then, transmitter option is . . .
A1 1/2-inch NPT to M20 316 stainless steel conduit adapter.
A2 1/2-inch NPT to 3/4-inch NPT 316 stainless steel conduit adapter.
B1 or B2 Blind DIN stainless steel adapter flanges mounted with NACE bolts on process head.
CC Custom calibration to user specified range and user specified transmitter tag number
entered and stored in memory.
CF Calibration Fixture (with ¼” NPT Port for pressure source) for STG93P only.
CM Compound characterized meter body.
CV Stainless steel center vent drain and bushing.
CR A286 stainless steel and 302/304 stainless steel (NACE) nuts for process heads and
316 stainless steel (NACE) bolts for mounting flange adapter to process head.
DN 316 stainless steel modified DIN process heads.
FB Flat mounting bracket (carbon steel).
F1 Calibration test report and certificate of conformance (F3399).
F3 Certificate of conformance (F3391).
F5 Certificate of Origin (F0195).
F7 NACE certificate (F0198).
HR Stainless steel reference head (carbon steel is standard).
LP Lightning protection.
LT
Low temperature (–50°C) ambient limit.
MB Angle mounting bracket (carbon steel).
ME Analog meter (0 to 100% linear, 0 to 10 square root).
Continued on next page