Filter
Top Products
216 ST 3000 Release 300 and SFC Model STS103 User’s Manual 6/08
12.1 Replacement Parts, Continued
Table 71 Parts Identification for Callouts in Figure 57, continued
Key
No.
Part Number Description Quantity
Per Unit
Optional Flange Adapter Kits (two heads) - Not Shown
30754419-002 Flange adapter kit (st. steel flange adapters with carbon steel bolts)
30754419-004 Flange adapter kit (Monel flange adapters with carbon steel bolts)
30754419-018 Flange adapter kit (st. steel flange adapters with 316 st. steel NACE bolts)
30754419-020 Flange adapter kit (Monel flange adapters with 316 st. steel NACE bolts)
K9
Not Shown Bolt, hex head, 7/16-20 UNF, 1.375 inches lg., flange adapter 4
K11
Not Shown Gasket, flange adapter 2
K10
Not Shown Flange adapter 2
K12
Not Shown Filter screen 2
30754419-003 Flange adapter kit (Hastelloy C flange adapters with carbon steel bolts)
30754419-019 Flange adapter kit (Hastelloy C flange adapters with 316 st. steel NACE bolts)
K9
Not Shown Bolt, hex head, 7/16-20 UNF, 1.375 inches lg., optional flange adapter 4
K11
Not Shown Gasket, flange adapter 2
K10
Not Shown Flange adapter 2
Process Head Kits (one head with PTFE head gasket)
30753908-001 Process head assembly kit (Hastelloy C head)
30753908-002 Process head assembly kit (Hastelloy C DIN head)
30753908-003 Process head assembly kit (carbon steel head with side vent/drain)
30753908-004 Process head assembly kit (st. steel head with side vent/drain)
30753908-005 Process head assembly kit (Monel head)
30753908-009 Process head assembly kit (carbon steel head without side vent/drain)
30753908-010 Process head assembly kit (stainless steel head without side vent/drain)
30753908-011 Process head assembly kit (stainless steel DIN head without side
vent/drain)
30753908-012 Process head assembly kit (carbon steel head - model STD110 only)
30753908-013 Process head assembly kit (st. steel head - model STD110 only)
30753908-014 Process head assembly kit (carbon steel DIN head - model STD110 only)
30753908-015 Process head assembly kit (st. steel DIN head - model STD110 only)
K1
Pipe plug 2
K2
Vent plug 1
K3
Vent bushing 1
K5
Process head 1
K6
Gasket (PTFE), process head 1
K11
Gasket (PTFE), optional flange adapter 1
Continued on next page