DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Management Terminal
3-3Switch-Based Bulletin Board
3
additional information concerning problems that have already been escalated by
the normal procedure.
Accessing the Bulletin Board
Any user with the appropriate permissions can log into the system and have
access to the bulletin board. Users that have “Maintain System” or “Administer
Features” permissions can enter, change, display, print, or schedule to print a
message. Users that have “Display Admin” and “Maintain Data” permission can
display the bulletin board. Any user who has “Display” permission can display,
print, and schedule to print the contents of the bulletin board.
When a user logs on to the system they are notified of any messages on the
bulletin board. The notification message indicates the last time the bulletin board
was updated, if any “High-Priority” message exist, and if the bulletin board is
80% or more full. If a “High-Priority” message exists, the command prompt will
change to the following message:
■ High-Priority Bulletin Board Messages Entered:
After the next command is entered, the default command prompt returns to the
screen.
User Considerations
■ Only one user at a time may edit a message on the bulletin board.
■ The user must have the proper permissions to access the bulletin board.
■ You, the user must maintain the information stored on the bulletin board. It
is your responsibility to delete old messages. If the bulletin board is full
any new messages overwrite old messages.
System Considerations
■ The Bulletin Board feature provides up to 3 pages of text for each
message. Each page is limited to 20 lines of text and 40 characters per
line. The first 10 lines of text on page 1 are reserved for Lucent Service’s
High-Priority messages.
System Bulletin Board Commands
The system commands “change bulletin board”, “display bulletin board,” and
existing commands in the user interface are provided for use in the Switch Based
Bulletin Board.
To edit or enter a message on the Switch Based Bulletin Board you must:
1. Log into the system with “Maintain System or Administer Features”
Permissions.
2. Enter the command change bulletin-board.
