![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/2/07/207ea955-b0a5-4690-afdf-8b9461a5122e/207ea955-b0a5-4690-afdf-8b9461a5122e-bg60b.png)
DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Object Repair Procedures
9-863FIBER-LK (Fiber Link)
9
105 FAIL The SNI circuit pack (endpoint 1) cannot communicate with the equipped SNI
in slot 5 (list fiber-link can be used to display fiber link endpoints).
1. Perform the ‘‘Fiber Fault Isolation Procedure’’. This should resolve multiple
SNI-PEER errors.
2. If the SNI being tested has SNI-PEER Error Type 769, replace the SNI being
tested. Replacing an SNI may be service interrupting. Refer to the SNI-BD
section for the procedure for replacing an SNI. To view SNI-PEER errors,
use the display errors command with category PNC-PEER. Retry the
command.
3. If the SNI being tested has SNI-PEER Error Type 769, replace the SNI in
slot 5.
106 FAIL The SNI circuit pack (endpoint 1) cannot communicate with the equipped SNI
in slot 6 (list fiber-link can be used to display fiber link endpoints).
1. Perform the ‘‘Fiber Fault Isolation Procedure’’
. This should resolve multiple
SNI-PEER errors.
2. If the SNI being tested has SNI-PEER Error Type 1025, replace the SNI
being tested. Replacing an SNI may be service interrupting. Refer to the
SNI-BD section for the procedure for replacing an SNI. To view SNI-PEER
errors, use the display errors command with category PNC-PEER. Retry
the command.
3. If the SNI being tested still has SNI-PEER Error Type 1025, replace the SNI
in slot 6.
107 FAIL The SNI circuit pack (endpoint 1) cannot communicate with the equipped SNI
in slot 7 (list fiber-link can be used to display fiber link endpoints).
1. Perform the ‘‘Fiber Fault Isolation Procedure’’
. This should resolve multiple
SNI-PEER errors.
2. If the SNI being tested has SNI-PEER Error Type 1281, replace the SNI
being tested. Replacing an SNI may be service interrupting. Refer to the
SNI-BD section for the procedure for replacing an SNI. To view SNI-PEER
errors, use the display errors command with category PNC-PEER. Retry
the command.
3. If the SNI being tested still has SNI-PEER Error Type 1281, replace the SNI
in slot 7.
Table 9-333. TEST #759 Configuration Audit — Continued
Error
Code
Tes t
Result Description/ Recommendation
Continued on next page