DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Commands
8-106display system-parameters maintenance
8
Product
Identification
This is a 10-digit number starting with 1 that identifies the switch to
an Operations Support System (OSS), for example, INADS.
First OSS
Telephone
Number
The first telephone number that the switch uses to report alarms to,
for example, INADS or Trouble Tracker. The number must be
obtained from the National Customer Support Center (NCSC) or
the TSC.
#
and
*
are not allowed in the telephone number.
Abbrev Alarm
Report
Enables the Abbreviated Alarm Report feature for the first OSS.
(yes)
Second OSS
Telephone
Number
The second telephone number that the switch uses to report
alarms to, for example, INADS or DEFINITY SNMP. The number
must be obtained from the National Customer Support Center
(NCSC) or the TSC.
#
and
*
are not allowed in the telephone
number.
Abbrev Alarm
Report
Enables the Abbreviated Alarm Report feature for the second
OSS. (no)
display system-parameters maintenance Page 3 of 3
MAINTENANCE-RELATED SYSTEM PARAMETERS
Modem Connection: external
Data Bits: 8
Parity: none
Modem Name:
RTS/CTS Enabled: &H1 Auto Answer Ring Count (rings): S0=10
Asynchronous Data Mode: Dial Type: T
DTE Auto-Data Speed: Adjustable Make/Break Ratio:
Disable Data Compression: &K0 Dial Command: D
Enable Error Control: No Answer Time-out: S7=255
Misc. Init. Param:
Help/Error Message Line
