DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Commands
8-121get vector
8
Feature Interactions
None
get vector
get vector [long] [print]
This command displays the triggering conditions and the SPE associated with a
core dump of memory to the tape or disk device. The vector is a set of system
reset levels which will cause the contents of memory to be saved on tape. When
the core dump occurs, the vector settings are cleared. The vector is set with the
set vector
command (not available to craft logins). If no core dump has taken
place since the vector was set, the settings are displayed. If a core dump has
taken place, the time and location of the core dump files is displayed.
NOTE:
When a system reset of a level that is set to trigger a core dump takes
place, the vector is cleared regardless of whether the core dump is
successful.
Enter ’translation’ or ’announcements’ or ’coredump’ or ’firmware’
’translation’ option includes translation only
’announcements’ option includes translation and announcments
’core-dump’ option includes translation, announcments, and code-dump
’firmware’ option includes translation, announcements, and firmware
Or press CANCEL to cancel the command
-------------------------------------------------------------------------------
Identifier command word(s) omitted; please press HELP PREV-FIELD to edit
-------------------------------------------------------------------------------
Command: format card-mem <Help>
Command:
