DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Architecture
1-43Facility Interface Codes
1
■ 9.0N — Unprotected terminal equipment
■ 9.0Y — Totally protected terminal equipment
The product line service code is 9.0F indicating it is terminal equipment with fully
protected premises wire at the private line ports.
Facility Interface Codes
A Facility Interface Code (FIC) is a five-character code (United States only) that
provides the technical information needed to order a specific port circuit pack for
analog private lines, digital lines, MTS lines, and WATS lines.
Table 1-19
through
Table 1-21
list the FICs. Included are service order codes,
Ringer Equivalency Numbers (RENs), and types of network jacks that connect a
line to a rear panel connector on a carrier.
Table 1-19. Analog Private Line and Trunk Port Circuit Packs
Circuit Pack FIC
Service
Order Code
Network
Jack
TN742 and TN747B Off-Premises
Station Port, and TN746B Off-Premises
Station Port or On-Premises Station port
0L13C 9.0F RJ21X
TN760/B/C/D Tie Trunk TL31M 9.0F RJ2GX
Table 1-20. Digital Trunk Port Circuit Packs
Circuit Pack FIC
Service
Order Code
Network
Jack
TN1654 and TN574 DS1 Converter; TN722B
DS1 Tie trunk; and TN767 and TN464 DS1
Interface
04DU9B,C 6.0P RJ48C
and
RJ48M
