![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/2/07/207ea955-b0a5-4690-afdf-8b9461a5122e/207ea955-b0a5-4690-afdf-8b9461a5122e-bg273.png)
DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Commands
8-316status tti
8
Output
TTI
Background
Task State:
One of the following:
generating TTI ports
removing TTI ports
suspended
not active
completed - all ports translated
The last execution of the background task completed normally.
completed - some ports not trans
The task completed due to resource exhaustion with some ports left
untranslated.
TTI State: off
The TTI feature is not enabled.
voice, data
The type of TTI ports that are being generated or removed
# of Boards
Completed:
Number of TTI-supported circuit packs that have been processed by the
background maintenance task.
A “completed” circuit pack has either had all its unadministered ports
translated as TTI ports or its TTI ports have been removed and are now
unadministered ports.
# of Boards
Left to
Process:
Number of TTI-supported circuit packs that have not yet been processed
by the background maintenance task.
Percent
Complete:
A ratio of the of number of circuit packs completed to the total number.
Elapsed
Time Since
Task
Started:
Elapsed time in hours:minutes:seconds since the TTI background task
was started.
This field is blank if the task is not active. If the task is completed or
suspended, this field displays the elapsed time up to when the job
finished or was suspended.