DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Commands
8-145list measurements ds1
8
Output
list measurements ds1
list measurements ds1 UUCSS
[print | schedule]
list measurements ds1-log UUCSS
[print | schedule]
list measurements ds1-fac
UUCSSf [log | summary] [print | schedule]
The
list measurements
ds1 and l
ist measurements ds1-log
commands
provide performance measurements on a DS-1 link. The
ds1
option provides a
summary report while the
ds1-log
option provides a detailed report.
The performance measurements of a DS-1 link indicate the quality of the DS-1
physical interface between the system and a far-end system.
The
list measurements ds1-fac
command provides link performance
measurements on a DS1 Converter facility.
The DS1 Converter Complex consists of two DS1Cs connected by one to four
DS1 facilities. This complex allows the distance between two port networks to
extend up to 100 miles, thereby extending the range of the optical fiber link within
limited bandwidth (96 channels). A DS1C Complex can be used in a direct
connectivity configuration or a Center Stage Switch configuration. The DS1
converters may be connected to an Expansion Interface(EI) or a Switch Node
Interface(SNI) via a metallic connection.
Port
The physical location (cabinet-carrier-slot-port circuit) of the marked port.
Board-Type
The type of circuit pack with the marked port.
list marked-ports
MARKED-PORT INFORMATION
Port Board-Type
1C0101 DIG-BD
1C0102 DIG-BD
Command successfully completed
