DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Commands
8-172ping ip-address
8
Output
The following example shows the output from the
ping ip-address 192.68.3.26
command.
Screen 8-4. Ping results
Field descriptions
Action/ Object Qualifier Qualifier Description Permissions
1
1. The ping ip-address command is restricted to the init, inads, and craft logins. You can place
additional restrictions on the command by selecting the object “ip-address” on the Restricted
Object List:
Enter change permissions loginid, where loginid is an administered login such as
inads) and press
Enter.
Set the Additional Restrictions to y in the Administration Commands section of the form.
Go to the second or third page of the form.
Enter ip-address in the list of Restricted Objects and press
Enter.
Defaults
Feature
Interactions
ping ip-address
ipadd
The IP address of the device
to ping
Example:
ping ip-address 192.68.3.26
init
inads
craft
none none
End-pt IP
The actual TCP/IP destination address of the ping command.
Port
Location of the C-LAN circuit pack.
Port Type
Can be either PPP-PT for PPP ports (ports 1-16) or ETH-PT for
the Ethernet port (port 17).
Result
PASS or FAIL
Time (ms)
The round-trip time (in milliseconds) of the ping.
Error Code
_____________________________________________________
PING RESULTS
End-pt IP Port Port Type Result Time(ms) Error Code
192.68.3.26 01C0202 PPP-PT PASS 221
