DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Commands
8-360test stored-data
8
test stored-data
test stored-data [short | long] [repeat
# | clear] [schedule]
The
test stored-data
command performs a set of consistency checks of the boot
images and translation data on tape and disk. In particular, software vintage
numbers and translation time stamps are compared.
The short test sequence includes only inter-device tests. These include a
tape-to-tape, disk-to-disk and two tape-to-disk tests for SPE duplex systems with
tape and disk devices on both carriers. The long test sequence includes up to
four intra-device consistency checks, one for each device. Another check of the
system boot source is included in the long sequence.
For SPE simplex systems, only one tape-to-disk inter-device test and two
intra-device consistency checks along with the boot source check are run. The
other tests simply do not appear in the short or long test sequences.
The lack of the optional disks does not affect which tests are run. For both SPE
simplex systems and SPE duplex systems, aborts are returned for those tests
which require a disk.
This command will abort if any other MSS operation has already begun.
If translations have been saved to disk since the last time the disk was backed
up to tape (a normal situation during work sessions), tests executed by this
command will fail.
test spe-standby PAGE 3 SPE B
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
01A1 MEM-BD 908 PASS
01A SW-CTL 92 PASS
01A1 PKT-INT 887 PASS
01A1 PKT-INT 888 PASS
Command Successfully Completed
