DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Object Repair Procedures
9-1285PMS-LINK (Property Management System Link)
9
customer to call the vendor of the PMS to check out the PMS device. Once
the PMS Link is successfully established, this error disappears from the
Hardware Error Log. No alarm is raised against this error.
j. The PMS Link has been busied out with the
busyout pms-link
command
or has been brought down with the
test pms-link long
command. The
PMS Link is torn down, and PMS Link maintenance will stop attempting to
reestablish the link in the case where the
busyout pms-link
command
has been used. When the
test pms-link long
command has been used,
PMS Link maintenance will continue to try to reset the link. To restore the
PMS Link after use of the
busyout pms-link
command, issue the
release
pms-link
command. To restore the PMS Link after use of the
test pms-link
long
command, issue the
test pms-link
command.
k. The PMS Link is physically established, but the protocol has not been
started by the PMS before the protocol timer expires. The PMS Link is NOT
torn down. If this error type occurs frequently (more than once a month),
advise the customer to call the vendor of the PMS to check out the PMS
device. Once the PMS Link is successfully established, this error
disappears from the Hardware Error Log. The PMS should be checked to
make sure that it will attempt to start the protocol according to the
PMS/PBX protocol specifications. No alarm is raised against this error.
l. For Error Type 2817 look for the following AUX data:
The PMS should be assessed for adherence to the PMS/PBX protocol
specifications.
10x The PMS violated the application protocol. The first message after a
request to initiate a database exchange was not the start of a database
exchange. The message is processed. If this error type with this aux data
value occurs frequently (more than once a month), advise the customer
to call the vendor of the PMS to check out the PMS device. Once the PMS
Link is successfully established, this error disappears from the Hardware
Error Log.
20x The PMS violated the application protocol. The start of a database
exchange was received in a state in which it was not expected. The
message is ignored. If this error type with this Aux data value occurs
frequently (more than once a month), advise the customer to call the
vendor of the PMS to check out the PMS device. Once the PMS Link is
successfully established, this error disappears from the Hardware Error
Log.
30x The PMS violated the application protocol. The end of a database
exchange was received when no exchange was in progress. The
message is ignored. If this error type with this Aux Data value occurs
frequently (more than once a month), advise the customer to call the
vendor of the PMS to check out the PMS device. Once the PMS Link is
successfully established, this error disappears from the Hardware Error
Log. No alarm is raised against this error.
