DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Object Repair Procedures
9-862FIBER-LK (Fiber Link)
9
102 FAIL The SNI circuit pack (endpoint 1) cannot communicate with the equipped SNI
in slot 2 (list fiber-link can be used to display fiber link endpoints).
1. Perform the‘‘Fiber Fault Isolation Procedure’’. This should resolve multiple
SNI-PEER errors.
2. If the SNI being tested has SNI-PEER Error Type 1, replace the SNI being
tested. Replacing an SNI may be service interrupting. Refer to the SNI-BD
section for the procedure for replacing an SNI. To view SNI-PEER errors,
use the display errors command with category PNC-PEER. Retry the
command.
3. If the SNI being tested still has SNI-PEER Error Type 1, replace the SNI in
slot 2.
103 FAIL The SNI circuit pack (endpoint 1) cannot communicate with the equipped SNI
in slot 3 (list fiber-link can be used to display fiber link endpoints).
1. Perform the ‘‘Fiber Fault Isolation Procedure’’
. This should resolve multiple
SNI-PEER errors.
2. If the SNI being tested has SNI-PEER Error Type 257, replace the SNI being
tested. Replacing an SNI may be service interrupting. Refer to the SNI-BD
section for the procedure for replacing an SNI. To view SNI-PEER errors,
use the display errors command with category PNC-PEER. Retry the
command.
3. If the SNI being tested still has SNI-PEER Error Type 257, replace the SNI in
slot 3.
104 FAIL The SNI circuit pack (endpoint 1) cannot communicate with the equipped SNI
in slot 4 (use list fiber-link to display fiber link endpoints).
1. Perform the ‘‘Fiber Fault Isolation Procedure’’
. This should resolve multiple
SNI-PEER errors.
2. If the SNI being tested has SNI-PEER Error Type 513, replace the SNI being
tested. Replacing an SNI may be service interrupting. Refer to the SNI-BD
section for the procedure for replacing an SNI. To view SNI-PEER errors,
use the display errors command with category PNC-PEER. Retry the
command.
3. If the SNI being tested has SNI-PEER Error Type 513, replace the SNI in
slot 4.
Table 9-333. TEST #759 Configuration Audit — Continued
Error
Code
Tes t
Result Description/ Recommendation
Continued on next page
