DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Commands
8-229status cdr-link
8
status cdr-link
status cdr-link [print]
The status cdr-link command displays the status of the call detail recording
(CDR) links. If a link is down, the report includes the number of times the switch
has tried to re-establish the link.
The CDR link is the physical link that the SPE uses to send call detail records to
an output device such as a Call Detail Recording Utility (CDRU). CDR links use
System Ports which are described in the PDATA-PT section of Chapter 9
. A
system may have up to two CDR links, a primary and a secondary. See PRI-CDR
in Chapter 9
.
Output
The following information is displayed for both the Primary and Secondary CDR
links, whether or not both are used.
Link State The operational status of the link as follows:
up The link is established and is capable of supporting the application.
This is the normal operational state.
down The link is physically down.
extension not administered An extension number for the output
device has not been assigned on the CDR system parameters form.
Number of
Retries
The number of times the switch has tried to set up the link.
status cabinet SPE B
CABINET CONFIGURATION STATUS CABINET CONNECTIVITY STATUS
Carrier PN/SN Carrier Cabinet PN/SN Connectivity Status
Location Number Type Type Active Standby
01A PN 1 processor MCC PN 1 up
01B PN 1 processor
01C PN 1 port
01D PN 1 port
01E PN 1 not-used
CABINET EMERGENCY TRANSFER CABINET ALARM STATUS
Emergency Select PN/SN Mj Mn Wn
Transfer Switch
PN 1 0 1 19
01B auto-
01A auto-
