DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Object Repair Procedures
9-450CONFIG (System Configuration)
9
The Error Type field specifies the carrier and slot location of the circuit pack that
caused the error as indicated in Table 9-188
. If the Error Type field is greater than
1000, subtract 1000 from the Error Type field before consulting the table.
If more than one CONFIG error is logged with an Aux Data of 1 at the same time,
investigate any EXP-INTF (Expansion Interface) errors before proceeding. Once
the port circuit pack location has been determined from Table 9-188
, use the list
configuration all command to determine if the circuit pack is inserted. If not,
insert the pack. If the circuit pack has already been inserted but the error
persists, replace the circuit pack.
Converting Aux Data to Port-Network Number
Aux Data Port-Network Number
01
12
23
34
45
56
67
78
89
910
10 11
11 12
12 13
13 14
14 15
15 16
16 17
17 18
18 19
19 20
20 21
21 22
