Filter
Top Products
Instructions for Operation
Operating Information
2Ć14
The following steps go through the process of selecting a file and modifying
individual output parameters.
1. Push the SETUP button in the MENU column. The SETUP menu in
Figure 2Ć5 appears.
Figure 2Ć5:ăSETUP Menu
2. Select Waveform Sequence from the bottom menu. Waveform SeĆ
quence toggles between the CH1 files (upper list) and the CH2 files
(lower list).
3. Turn the general purpose knob to highlight a file in the displayed list of
files; these are the files currently in internal memory. Then, push ENTER
to select the file; the AWG2005 changes to the output parameters
associated with the file you selected.
4. After the file is selected, push the front panel VALUE button. Now you
can modify output waveform parameters.
5. Setting individual parameters:
Push the SETUP button in the MENU column (if the button is not seĆ
lected). Now select the appropriate item from the bottom menu; then
use the numeric keys or general purpose knob to modify the parameter
setting.