Filter
Top Products
Options and Accessories
AWG2005 Service Manual
7Ć7
Cable
Option 04 comes with a digital data out cable. The cable connecting the
AWG2005 rear panel output connectors and the user circuit is extremely
critical for operation at the maximum clock frequency. Figure 7Ć7 shows the
digital data out cable provided as a standard accessory and the receiving
connector.
Connector : Female Connector : Female
Flat Cable
Figure 7Ć7:ăDigital Data Out Cable
If you use a cable other than the one provided as the standard accessory
the cable must meet the following conditions.
H It must be a coaxial cable with a characteristic impedance of 50ĂΩ for all
DATA and CLOCK lines.
H Keep cables as short as possible. The acceptable length depends on
the characteristics of the coaxial cable used, but lengths under 1Ămeter
are preferable.