Filter
Top Products
Performance Tests
AWG2005 Service Manual
4Ć49
This procedure checks the AWG2005 floating point processor.
NOTE
This check requires that the AWG2005 has Option 09 installed.
Equipment Required: None.
Prerequisites: The AWG2005 meets the prerequisites listed on page 4Ć7.
Procedure:
1. Check that floating point processor test in internal diagnostics passes:
a. Run the AWG2005 internal diagnostics: Push the AWG2005 ON/
STBY switch two times so that the AWG2005 runs the powerĆon
diagnostics.
b. Check the FPP test results: When the AWG2005 finishes the FPP
test, check that the test result is Pass.
This completes the performance tests for the AWG2005.
Floating Point
Processor Check
(Option 09)