Filter
Top Products
520 U41117-J-Z125-7-76
Message lines Explanation of console messages
SXVL020 VLM(#20): ALERT: vtls.conf: SCRATCH_LABEL_<???>: wrong format
Meaning
When the VLM was started errors were found in configuration file vtls.conf. The VLM is
terminated.
Response
Notify maintenance staff.
SXVL021 VLM(#21): ALERT: vtls.conf: SCRATCH_BLOCK<???>: wrong format
Meaning
When the VLM was started errors were found in configuration file vtls.conf. The VLM is
terminated.
Response
Notify maintenance staff.
SXVL022 VLM(#22): ALERT: wrong DTV version for cache X: maximal LV size should be at
least NNN, is only MMM
Meaning
After an update installation the version of the DTV file system no longer corresponds to the
existing software status.
Response
Notify maintenance staff.
SXVL023 VLM(#23): ALERT: X: not accessible (<errmsg>), giving up
Meaning
Cache file system X cannot be accessed; the VLM has been terminated.
Response
Hardware faults are possibly the cause. If this is not the case or they cannot be rectified:
notify the maintenance staff.
SXVL024 VLM(#24): ALERT: more than NN logical volumes faulty in less than XXs, giving up
Meaning
In a relatively short period more than a particular number of logical volumes has been
placed in the “Faulty” status, i.e. is no longer accessible. The VLM has been terminated to
prevent further problems.
Response
Hardware faults are possibly the cause. If this is not the case or they cannot be rectified:
notify the maintenance staff.
SXVL996 VLM 996 NOTICE "Stop for Maintenance."
Meaning
The VLM was stopped via a menu in the graphical user interface.