Filter
Top Products
U41117-J-Z125-7-76 153
GXCC Function bar
6.2.5.2 Settings
The slider controls the Autoscan interval for exchanging information with the InfoBroker. An
Autoscan cycle consists of data transfer, display generation and autoscan delay.
The default setting is “Self Adjusting”. In this mode, the interval is automatically adapted to
the number of objects to be displayed, and varies between 4 and 20 seconds. By selecting
“Manual Adjusting” and moving the slider, you can also set the Autoscan interval manually.
The current mode and the interval value ‘t’ will be displayed in the status bar at the bottom
of the XTCC window in the form ‘S ts’ or ‘M ts’.
S GXCC optimizes the autoscan interval in accordance with the current configuration.
M The value set with the slider is used. Click “OK” to confirm the new value.
It is recommended that you operate GXCC in S mode (S = Self Adjusting).
Buttons at the bottom of the screen
OK Saves the settings. The window is closed.
Help Opens a text window with help information.
Cancel Closes the window without saving any changes made.