Filter
Top Products
U41117-J-Z125-7-76 205
GXCC Function bar
The following data is output:
VSN Volume serial number, name of the logical volume.
GRP Logical volume group. A cartridge migrated from CentricStor Version 1
belongs to the BASE group.
C-ID Cache ID (this column appears only when “CacheID” has been enabled)
SIZE Amount of user data on the volume (decimal, in bytes).
ACCESS TIME Date and time of the last access, empty if uninitialized.
STATE State of the logical volume:
Faulty The logical volume is faulty. It can no longer be
used.
Home The logical volume is currently not being used.
Mounted The logical volume has been inserted in a logical
drive.
Mount Pending The logical volume has just been inserted in a virtual
tape drive. There is still no confirmation for this.
Mnt. Queued A mount request for the logical volume was queued
by the VLM due to a lack of resources.
Restoring The logical volume is just being read in by the phys-
ical volume.
STALE Volumes which are being restored as a result of a canceled mount re-
quest:
R “restoring”: Volume is being restored
FLAGS Flags:
D “dirty”: The volume is located in the cache but has not been
saved since the last change.
M “migrated”: The volume is no longer located in the cache and
must therefore be read in from the physical tape be-
fore it is next accessed.
Q “queued”: Job was queued
R “restore”: Volume is being restored
S “save”: Volume is just being saved
DRV Virtual drive if MOUNTED or IN_TRANSIT. If present, an alias name is
also output.
VLS Virtual library service to which the LV is assigned.