Filter
Top Products
U41117-J-Z125-7-76 145
GXCC Function bar
6.2.2 File
Es stehen folgende Funktionen zur Verfügung:
– Save
– Open
– Show
– Print
– Exit
6.2.2.1 Save
Saves the current InfoBroker data. You can thus use this to recover the system display
subsequently.
By default, configurations are saved as .gxd files.
With this function you save precisely the data which currently leads to the picture
displayed. As a result you can practically retain a snapshot in the form of source
files. This data can later be read into a GXCC. The same picture is then displayed
again, even if the situation no longer exists. You can also transfer this data to a
totally different system (arbitrary PC) and view it there with a GXCC without having
access to a CentricStor. This is called Simulation mode. Naturally you can also use
this option for analysis purposes.
Example
There is one display which cannot be understood. After the “Save” function has
been called a file is generated which is sent to the Service department. Service
can then use this data to ascertain what is wrong.
This method is better than a screenshot because Service is provided with the
actual data, which it can use to inspect every individual variable with the current
values.
i