Filter
Top Products
U41117-J-Z125-7-76 517
Explanation of console messages Message lines
9.2.25 SXVL... (VLM: Virtual Library Manager)
SXVL001 VLM(# 1): ALERT: ???: cannot register as supervisor - not mounted ?
Meaning
The VLM cannot log on as supervisor for a specific cache filesystem. The reason for this is
usually that the filesystem specified in the error message is not mounted.
You can use the mount command to determine whether the filesystem is mounted. The
named filesystem must be present in the output list.
Response
Notify maintenance staff.
SXVL002 VLM(# 2): NOTICE: move ???: volume not found
Meaning
The PLM wants to reorganize the specified logical volume. However, the VLM is not aware
of this volume. The cause lies in an inconsistency between the VLM and PLM data mainte-
nance systems.
Response
This error is not usually critical. However, you should check whether the volume exists and
delete it in the PLM if necessary.
SXVL003 VLM(# 3): WARNING: no space in cache ???, mount of volume ??? queued
Meaning
The mount job for a logical volume has been queued because there is no further free space
available in the cache filesystem.
This error occurs if the data is not saved to tape quickly enough, e.g. in the case of PLM/
PLS/PDS errors or an incorrect configuration (not enough physical drives).
SXVL004 VLM(# 4): ERROR: volume group for volume ??? not configured: ???
Meaning
Configuration error: a volume group has been deleted even though a logical volume exists
for it.
Response
You must recreate the volume group.
SXVL005 VLM(# 5): ERROR: volume ???: more than one cache entry, cannot remove ???,
aborting
Meaning
This error occurs after system crashes: there are then two files for one logical volume
(following a move to another filesystem) but the VLM is unable to delete the superfluous file.
Response
Notify maintenance staff.