Filter
Top Products
U41117-J-Z125-7-76 443
Explanation of console messages General
● Alongside the message number, the weight and the message text itself, the message
provides the following additional information.
Example
In the sections below, only the message line components printed in bold here,
i.e. the message number and message text, are presented.
When interpreting console messages, you must take into consideration that error
messages are issued at different levels for one and the same error event.
If problems occur with physical MTC drives or cartridges, the error messages are collected
in the PLM. This is also where a relation (unknown in lower levels) to physical and logical
volume identifiers is established.
Corrective measures are suggested where possible. If there are no corrective
measures specified, this may be due to the following reasons:
– Corrective measures are not required (e.g. in the case of an “all clear”
message).
– The error is extremely complex and its source cannot be determined. In this
case, error analysis and correction are carried out by service personnel.
The DAS and VDAS error messages are described in the “DAS Administration
Guide” in chapter 6:
Version 3.1E: http://www.adic.com/us/collateral/omDas310Administration.pdf
Version 3.12: http://www.adic.com/us/collateral/omDas312Administration.pdf
SXSM018 2005-08-06 10:51:45 ICP0 : Aug 6 10:51:45 sma003: Fan 2: Fan is not manageable
Message text
Separator
Name of the ISP
Time
Date
Message number
i
i
i