Filter
Top Products
166 U41117-J-Z125-7-76
Function bar GXCC
6.2.7 Configuration
PVGs and LVGs can be configured, i.e. created, modified and deleted, in User mode.
Changed parameters are stored in the file
/usr/apc/broker/vtls_vg.conf.new
. The floppy
disk symbol appears in the CentricStor main window.
The changed data is activated using the “Distribute and Activate” function.
Changes to the LVGs affect VLM and PLM, changes to the PVGs affect only
thePLM. These components are stopped and restarted during “Distribute and
Activate”.
Afterward the file
/usr/apc/conf/vtls_vg.conf
contains the modified data. The floppy disk
symbol in the GXCC window disappears if no further configuration changes are in prepa-
ration in Service mode.
When the configuration menu is opened and the InfoBroker started the configuration data
is checked for consistency. If inconsistencies are found or if files are missing, you will not
be offered to configuration menut when Configuration is selected, but you will instead be
offered the “Status Configuration” function:
If you click this function, you will be provided with information about the error and further
instructions, if available.
i