Filter
Top Products
U41117-J-Z125-7-76 513
Explanation of console messages Message lines
SXTF005 NOTICE: dtv_iread: root directory stale!
SXTF005 NOTICE: dtv_rdlookup: root directory stale: <name>, ino=<num>
Meaning
These error messages indicate that, due to manual intervention, the image of the root
directory stored in the working memory is no longer up to date. This does not impair
operation but, if it occurs frequently, there will be a loss of performance because the root
directory has to be read in again.
SXTF005 NOTICE: dtv_iocache_alloc: memory resource limits exceeded
SXTF005 NOTICE: dtv_iocache_alloc: not enough virtual address space
SXTF005 NOTICE: dtv_iocache_alloc: not enough physical memory
Meaning
It was not possible to allocate the necessary resources for the DTV I/O cache. As a result,
operator message DTV(# 7) is output.
Response
Notify maintenance staff.
SXTF005 NOTICE: dtv_binit: not enough physical memory
SXTF005 NOTICE: dtv_binit: syssegsz <size>, too small
SXTF005 NOTICE: dtv_binit: <resource> allocation failed
Meaning
The DTV file system interface could not be initialized. As a result, operator message
DTV(# 7) is output.
Response
Notify maintenance staff.
SXTF005 NOTICE: dtv_binit: address map allocation for data compression failed
Meaning
It was not possible to allocate the necessary resources for DTV data compression.
As a result, operator message DTV(# 5) is output.
Response
The system is configured incorrectly. Notify maintenance staff.
SXTF005 NOTICE: dtv_ta_cleanup(<maj,min>): pending meta data update, aborted!
Meaning
The specified file system has been unmounted, even though it was not possible to write all
metadata successfully. As a result, operator message DTV(# 2) is output.
Response
Notify maintenance staff.