Filter
Top Products
AW1600 Owner’s Manual
Details on libraries and scene memory
8
Using libraries and scene memories
78
From this library you can recall dynamics settings to the
currently selected channel. Of library numbers 001–128,
numbers 001–040 are read-only, and 041–128 can be writ-
ten.
1
Use the [INPUT SEL] keys, [TRACK SEL]
keys, [STEREO SEL] key, or pads 1–4 to
select the channel into which you want to
recall the dynamics settings.
2
Perform one of the following actions to
access the LIBRARY page of the DYN
screen
• Press the [DYN] knob repeatedly
• Hold down the [DNY] knob and press the CURSOR
[ ]/[ ] keys
• Hold down the [DYN] knob and turn it to left or right
You can also recall dynamics library data into an input
channel directly from the INPUT SETTING popup
window. To do so, move the cursor to the DYN button
in the window and press the [ENTER] key.
This library is used by internal effects 1/2. Of library num-
bers 001–128, numbers 001–041 are read-only, and 042–
128 can be written.
1
Perform one of the following actions to
access the LIBRARY page of the EFF 1/2
screen
• Press the [EFFECT 1] or [EFFECT 2] knob repeatedly
• Hold down the [EFFECT 1] or [EFFECT 2] knob and
press the CURSOR [ ]/[ ] keys
• Hold down the [EFFECT 1] or [EFFECT 2] knob and
turn it to left or right
You can also recall library data for an effect that has
been inserted in the input channel directly from the
INPUT SETTING popup window. To do so, move the
cursor to the EFF1 or EFF2 button in the window and
press the [ENTER] key.
This library contains settings used to apply EQ and
dynamics processing to the stereo output channel during
mixdown. It contains EQ and dynamics settings suitable
for processing the final mix. All library numbers 00–13
are read-only, and 00 is data for initializing the stereo out-
put channel.
1
Repeatedly press the [RECORD] key or
hold down the [RECORD] key and use the
CURSOR [ ]/[ ] keys to access the MIX-
DOWN page of the RECORD screen.
2
Move the cursor to the LIBRARY button in
the screen, and press the [ENTER] key.
The MASTERING LIBRARY popup window will
appear.
1 EXIT button
Closes the popup window and returns to the previous
MIXDOWN page.
This library contains sets of up to sixteen samples for use
with the Quick Loop Sampler. Sets of drum loop or sound-
effect samples are saved on the hard disk as sample librar-
ies. When you recall one of these, those samples will be
assigned to the pads and sample banks, so you can imme-
diately play them from the pads.
Dynamics library
■ Recalling dynamics library data
Effect library
■ Recalling effect library data
• The [M] symbol indicates monaural input, and [S] indicates that
stereo input is supported. If an effect indicated by [M] is inserted
into paired channels (such as the stereo output channel), the
sense of stereo will be lost.
• 019. HQ.Pitch cannot be recalled to effect 1.
NOTE
Mastering library
■ Recalling mastering library data
1
Sample library
• Unlike the other libraries, the sample library data is shared by all
songs.
NOTE