Filter
Top Products
Playing the demo song
29
AW1600 Owner’s Manual
3
Listening to the demo song
Here’s how to play back the demo song you loaded, and adjust the monitor level.
1
Either press the [VIEW] key repeatedly or
hold down the [VIEW] key and use the CUR-
SOR [ ]/[ ] keys to access the VIEW
screen METER page.
The VIEW screen METER page contains meters that
show the input level of each channel and the output
level of the stereo output channel. It is convenient to
display this page when you want to check the level of
each track.
2
Lower the AW1600’s [STEREO] fader to the
– infinity position. Also make sure that the
AW1600’s [MONITOR PHONES] knob and
the volume of your monitor system are
turned down.
3
Press the PLAY [ ] key.
The demo song will begin playing, and the level of
each track channel will be displayed in the METER
page of the VIEW screen.
4
To adjust the monitor level appropriately,
use the AW1600’s [MONITOR PHONES]
knob and the volume control of your moni-
tor system.
5
To stop the song, press the STOP [■] key.
Playing the demo song
• Make sure that the selected channel area at the upper left of
the METER page indicates either TRACK 1–8 or TRACK 9/
10–15/16. If neither of these are displayed, press either the
[TRACK SEL] key 1–8 or 9/10–15/16.
NOTE
• The demo song uses the Scene function to switch the settings
of the mixer. This means that playback will occur using the
pre-specified balance — you do not need to operate the fad-
ers.
HINT