Filter
Top Products
Writing audio data (Track At Once)
10
Creating an audio CD
105
AW1600 Owner’s Manual
4
Move the cursor to the NEW button, and
press the [ENTER] key.
The song list will show information (track number/
song name/size of the stereo track) for the song that
will be written to track 1 of the CD.
5
Move the cursor to the dotted frame in the
song list, and turn the [DATA/JOG] dial to
select the song that will be written to track
1.
6
Repeat steps 4 and 5 to select the songs
that will be written to track 2 and following.
7
Move the cursor to the EXECUTE button
and press the [ENTER] key.
A popup window will ask you to confirm.
8
To begin writing, move the cursor to the OK
button and press the [ENTER] key.
While data is being written to the media, a popup win-
dow will indicate “CD Writing...” When writing is
completed, a popup window will ask you whether you
want to finalize.
9
To finalize the disc, move the cursor to the
OK button and press the [ENTER] key.
If you do not want to finalize the disc, move the cursor
to the CANCEL button and press the [ENTER] key.
This completes the writing process.
• When you turn the [DATA/JOG] dial, you will see only songs
for which the current stereo track contains data.
• Songs with a stereo track shorter than four seconds will not
be displayed.
NOTE
• When you move the cursor to the NEW button and press the
[ENTER] key, a new song will be added at the end of the
existing songs.
• By using the INS button instead of the NEW button, you can
insert a new song immediately before the song that is
selected in the list.
•You can use the DEL button to delete the currently selected
song from the song list.
HINT
• When you add a song to the song list, the same song will
always be initially selected. Change this as desired.
NOTE
• If an error message of “BUFFER UNDERRUN!” appears while
writing, a buffer underrun has occurred. In this case, either
decrease the writing speed to 4x or set the UNDERRUN
PROTECT button to the ENABLE position (
→
p. 103).
• If you enabled the writing test in “Basic settings for the CD-
RW drive” (
→
p. 103), a writing test will be performed before
the data is actually written. If a problem occurs during the
writing test, an error message will appear.
• Copy-prohibit data will automatically be written into the CD
that is created.
NOTE