Filter
Top Products
AW1600 Owner’s Manual
List of editing commands
12
Track editing
134
Exchanges data between the specified tracks.
● For an audio track
Adjusts the length of the specified region of an audio
track, without changing the pitch.
● If you set Ratio = 50%
● If you set Ratio = 200%
Parameter Range Explanation
1 From TR
1–16 A single audio track
1/2–15/16 A pair of adjacent odd-numbered/
even-numbered audio tracks
ST The stereo track
2 From V.TR
1–8 Exchange-source virtual track
number
3 Name
Up to eight
alphanumeric
characters
Exchange-source virtual track
name (display only)
4 To TR
*1
*1. The items that you can select in 4 To TR (copy-destination track)
will depend on the
1 From TR (copy-source track) setting.
If
1 From TR is a single audio track 1–16, you can select only a sin-
gle audio track 1–16.
If
1 From TR is ST or 1/2–15/16 (a pair of adjacent audio tracks),
you can select only 1/2–15/16 (a pair of adjacent audio tracks).
1–16 A single audio track
1/2–15/16 A pair of adjacent odd-numbered/
even-numbered audio tracks
5 To V.TR
1–8 Exchange-destination virtual
track number
6 Name
Up to eight
alphanumeric
characters
Exchange-destination virtual
track name (display only)
EXCHANGE
4 65
1 2 3
EXCHANGE
From
Track
To
Track
From
Track
To
Track
1 2 3 4 5 6
A B C D E F
1 2 3 4 5 6
A B C D E F
■ Parameter list
• The track names will not be exchanged.
NOTE
Parameter Range Explanation
1 From TR
1–16 A single audio track
1/2–15/16 A pair of adjacent odd-numbered/
even-numbered audio tracks
ST The stereo track
2 From V.TR 1–8 Virtual track number
3 From Start Specify a point Beginning of the edited region
4 From End Specify a point End of the edited region
5 To End
Specify a point Specify the length to which the
selected region will be com-
pressed or expanded
6 To Ratio
50–200% Specify the percentage by which
the selected region will be com-
pressed or expanded
TIME COMP/EXP
(Time Compression/Expansion)
5 6
1 2 3 4
TIME
COMP/EXP
From End
1 2 3 4 A B C D
12 3 4
A B C D
From Start
To END
TIME
COMP/EXP
From End
1 2 3 4 A B C D
1
C D
From Start
To END
2 3 4
■ Parameter list
•To End and To Ratio are linked, so that editing one field will cause
the other field to change.
•You cannot set To End or To Ratio to a value that would cause the
ratio to exceed 50–200 percent.
•From Start value and From End value must be at least 45 msec
apart. These cannot be set to a shorter interval.
NOTE