Filter
Top Products
AW1600 Owner’s Manual
Exchanging Song Data With Other AW-series Audio Workstations
13
Song management
156
5
Turn the [DATA/JOG] dial to select a song
that you want to restore.
6
Move the cursor to the ENABLE/DISABLE
button and press the [ENTER] key.
The symbol at the right of the data will change to ●,
and the data will be selected for restoring.
7
Repeat steps 5 and 6 to select all of the
other AW-series songs that you want to
restore.
8
To execute the restore operation, move the
cursor to the EXECUTE button and press
the [ENTER] key.
The restore operation will begin. While the song data
is being loaded, a popup window will indicate the
progress.
• The list will show all the songs that were backed up to CD-R/
RW media, but you can execute the restore operation only for
44.1 kHz/16-bit songs.
NOTE
• When a song with the same name already exists, the name of
the restored song will automatically be changed. For exam-
ple, if “001_Song” already exists, the song name will be
altered as in: “001_Song0”, “001_Song1” … etc.
NOTE