Yamaha aw1600 Stereo System User Manual


 
AW1600 Owner’s Manual
Using external effects
15
176
Using the AW1600 with external devices
Signal flow when using an external effect processor
8
In the Selected Channel section, repeatedly
press the [PAN/BAL] knob to access the
PAN page of the PAN screen, and spread
apart the pan settings of input channels 3/4.
The effect sound will be heard in stereo. If desired,
you can specify input channels 3/4 as a pair.
9
Raise the [STEREO] fader to the 0 dB posi-
tion, and while playing back the song,
adjust the input level of your external effect
processor and use the [GAIN] knobs to
adjust the input level of input channels 3/4.
If desired, return to step 5 and readjust the send level
to AUX bus 1 for each track channel. If you want to
adjust the AUX bus 1 master level, use the BUS page
of the VIEW screen (or the AUX OUT page of the
PAN screen).
10
In the MIXDOWN page of the RECORD
screen, switch the REC button on, and per-
form the mixdown.
Track 1
Track 2
Track 3
Track 4
Track 5
Track 6
Track 7
Track 8
Mixer section
Stereo bus
Input
channels
Stereo
output
channel
Recorder section
AUX bus
Track
channels
AUX bus 1
master
Effect processor
If you use these settings, leave the AUX 1 knob and AUX 2
knob of input channels 3/4 set all the way to the left
(–
dB). If you raise these levels, the signal will loop, creating
oscillation.
NOTE
When you are finished with the mixdown, turn the PAN screen
AUX OUT page setting back to its original setting of STEREO.
NOTE