Yamaha aw1600 Stereo System User Manual


 
AW1600 Owner’s Manual
Effects Parameters
188
Appendix
REVERB HALL, REVERB ROOM, REVERB STAGE, REVERB PLATE
EARLY REF.
GATE REVERB, REVERSE GATE
Parameter Range Description
REV TIME 0.3 – 99.0 s Reverb time
INI.DLY 0.0 – 500.0 ms Initial delay before reverb begins
HI.RATIO 0.1 – 1.0 High-frequency reverb time ratio
LO.RATIO 0.1 – 2.4 Low-frequency reverb time ratio
DIFF. 0 – 10 Reverb diffusion (left–right reverb spread)
DENSITY 0 – 100% Reverb density
E/R DLY 0.0 – 100.0 ms Delay between early reflections and reverb
E/R BAL. 0 – 100% Balance of early reflections and reverb (0% = ER, 100% = reverb)
HPF Thru, 21.2 Hz – 8.0 kHz High-pass filter cutoff frequency
LPF 50 Hz – 16.0 kHz, Thru Low-pass filter cutoff frequency
GATE LVL OFF, –60 to 0 dB Level at which gate kicks in
ATTACK 0 – 120 ms Gate opening speed
HOLD 0.02 ms – 2.13 s Gate open time
DECAY 6.0 ms – 46.0 s Gate closing speed
MIX BAL. 0 – 100 [%] Mix balance of the effects and dry sounds
Parameter Range Description
TYPE S-Hall, L-Hall, Random,
Revers, Plate, Spring
Type of early reflection simulation
ROOMSIZE 0.1 – 20.0 Reflection spacing
LIVENESS 0 – 10 Early reflections decay characteristics (0 = dead, 10 = live)
INI.DLY 0.0 – 500.0 ms Initial delay before reverb begins
DIFF. 0 – 10 Reverb diffusion (left–right reverb spread)
DENSITY 0 – 100% Reverb density
ER NUM. 1 – 19 Number of early reflections
FB.GAIN –99 to +99% Feedback gain
HI.RATIO 0.1 – 1.0 High-frequency feedback ratio
HPF Thru, 21.2 Hz – 8.0 kHz High-pass filter cutoff frequency
LPF 50 Hz – 16.0 kHz, Thru Low-pass filter cutoff frequency
MIX BAL. 0 – 100 [%] Mix balance of the effects and dry sounds
Parameter Range Description
TYPE Type-A, Type-B Type of early reflection simulation
ROOMSIZE 0.1 – 20.0 Reflection spacing
LIVENESS 0 – 10 Early reflections decay characteristics (0 = dead, 10 = live)
INI.DLY 0.0 – 500.0 ms Initial delay before reverb begins
DIFF. 0 – 10 Reverb diffusion (left–right reverb spread)
DENSITY 0 – 100% Reverb density
ER NUM. 1 – 19 Number of early reflections
FB.GAIN –99 to +99% Feedback gain
HI.RATIO 0.1 – 1.0 High-frequency feedback ratio
HPF Thru, 21.2 Hz – 8.0 kHz High-pass filter cutoff frequency
LPF 50 Hz – 16.0 kHz, Thru Low-pass filter cutoff frequency
MIX BAL. 0 – 100 [%] Mix balance of the effects and dry sounds
Effects Parameters