Details on libraries and scene memory
8
Using libraries and scene memories
77
AW1600 Owner’s Manual
This section explains how to access each type of library or scene memory, and describes the
functions that are unique to each of these screens.
From this library you can recall EQ, dynamics, and inter-
nal effect settings to the currently selected input channel.
Use this when you want to apply EQ, dynamics, and inter-
nal effects to the input signal that you are recording.
Library numbers 00–40 are all read-only, and 00 is data
for initializing an input channel.
In order to use the input library, you will need to insert
internal effect 1 or 2 into that input channel.
1
Press and hold the [INPUT SEL] key for the
desired input channel.
The INPUT SETTING popup window will appear.
2
Move the cursor to the LIBRARY button and
press the [ENTER] key.
A popup window will ask you whether you want to
insert internal effect 1 or 2 into that input channel.
This popup window will change as follows, depending
on how internal effects 1/2 are being used.
● If the song is in the default state
● If effect 1 is already inserted into a spe-
cific input channel
● If effects 1 and 2 are already inserted into
specific input channels
3
Move the cursor to the EFF1 or EFF2 button
and press the [ENTER] key.
The corresponding internal effect will be inserted into
the input channel, and the INPUT LIBRARY popup
window will appear.
1 EXIT button
Closes the popup window and returns to the previous
INPUT SETTING popup window.
From this library you can recall EQ settings to the cur-
rently selected channel. Of library numbers 001–128,
numbers 001–040 are read-only, and 041–128 can be writ-
ten.
1
Use the [INPUT SEL] keys, [TRACK SEL]
keys, [STEREO SEL] key, or pads 1–4 to
select the channel into which you want to
recall the EQ settings.
2
Perform one of the following actions to
access the LIBRARY page of the EQ screen
• Press the [EQ] knob repeatedly
• Hold down the [EQ] knob and press the CURSOR
[ ]/[ ] keys
• Hold down the [EQ] knob and turn it to left or right
You can also recall EQ library data into an input chan-
nel directly from the INPUT SETTING popup win-
dow. To do so, move the cursor to the EQ button in the
window and press the [ENTER] key.
Details on libraries and scene memory
Input library
■ Recalling input library data
• If an effect has already been inserted into that input channel,
the INPUT LIBRARY popup window will appear immediately.
HINT
1
EQ library
■ Recalling EQ library data