Filter
Top Products
5•Service
Doc. 065291-01 3/09 187
9. Disconnect the EGC IN and EGC OUT lines from the INLET and
OUTLET ports on the cartridge.
10. Lift the EGC holder out
of the top cover and pull
the liquid lines through
the tubing chase (see
Figure 5-75
) to remove
them from the ICS-
2100.
Figure 5-75. Top Cover Tubing Chase
11. If a CR-TC is installed, go on to Section 5.23.2.
12. If an EPM is installed, go on to Section 5.23.3
.
13. If neither a CR-TC or EPM is installed, go on to Section 5.23.4
.
Tubing Chase