Filter
Top Products
5•Service
Doc. 065291-01 3/09 179
Filling the EGC CO
3
Mixer with Carbonate Eluent
Figure 5-70 illustrates the liquid flow path through the eluent generator
components during initial filling of the EGC CO
3
Mixer with carbonate
eluent.
Figure 5-70. Plumbing for Initial Filling of the EGC CO
3
Mixer with Carbonate Eluent
EGC
DEGAS
EGC
IN
Connect to
Gas Separato
r
Assembl
y
TO DEGAS
ELUENT OUT
TO SRS/AES
REGEN OUT
WASTE,
GAS
SEPARATOR
Connect to
Suppressor
Regen Out
Pre-plumbed
Pump Pulse
Damper
to
EGC
OUT
TO DEGAS
ELUENT IN
Back-
pressure
Coil
TO INJ
VALVE IN - P/
ELUENT OUT
To waste
EGC CO
Mixer
3
TO EGC CO3
MIXER IN
TO EGC CO3
MIXER OUT
14 MPa (2000 psi)
at 1.0 mL/min
TO PUMP/
DAMPER
To the EluGen
cartridge inlet port
From the EluGen
cartridge outlet port