Filter
Top Products
Doc. 065291-01 3/09 99
5•Service
This chapter describes ICS-2100 service and repair procedures that the user can
perform. All procedures not included here, including electronics-related repair
procedures, must be performed by Dionex personnel. For assistance, contact
Dionex Technical Support. In the U.S., call 1-800-346-6390. Outside the U.S.,
call the nearest Dionex office.
Before replacing any part, refer to the troubleshooting information in Chapter 4
to
isolate the cause of the problem.
5.1 Diagnostic and Calibration Procedures
Diagnostic and calibration procedures can be performed either from the touch
screen or from the Chromeleon Wellness Panel (see Figure 5-1
).
For an overview of the Wellness Panel features, see Section 5.1.1
. For an
overview of the diagnostic and calibration touch screen, see Section 5.1.2
. For
instructions on performing calibration and diagnostic procedures, see the
following sections:
• Calibrating the Conductivity Cell (Section 5.1.3)
• Calibrating the Flow Rate (Section 5.1.4)
• Calibrating the Vacuum Degas Assembly (Section 5.1.5)
Substituting non-Dionex parts may impair performance, thereby
voiding the product warranty. Refer to the warranty statement in the
Dionex Terms and Conditions for more information.