Filter
Top Products
5.1.6 Enable or disable the display backlight
Display (standard) OFF-LINE MAINT > OFF-LINE CONFG > DISPLAY > BKLT
Chinese-language
display
Offline Maintain > Configuration > Display > Backlight
ProLink II ProLink > Configuration > Display > Display Options > Display Backlight On/Off
ProLink III Device Tools > Configuration > Transmitter Display > General
Field Communicator Configure > Manual Setup > Display > Backlight
Overview
You can enable or disable the display backlight.
Procedure
Enable or disable Backlight.
The default setting is Enabled.
5.1.7 Enable or disable Status LED Blinking
Display (standard) Not available
Chinese-language
display
Not available
ProLink II ProLink > Configuration > Display > Display Options > Display Status LED Blinking
ProLink III Device Tools > Configuration > Transmitter Display > General
Field Communicator Configure > Manual Setup > Display > Display Variable Menu Features > Status LED Blinking
Overview
By default, the status LED blinks (flashes) to indicate unacknowledged alarms. If you
disable Status LED Blinking, the status LED does not blink, whether alarms are acknowledged
or not. It still changes color to indicate active alarms.
Procedure
Enable or disable Status LED Blinking.
The default setting is Enabled.
Configure device options and preferences
Configuration and Use Manual 63