Filter
Top Products
Optical switch indicator and optical switch statesTable B-1:
Optical switch indicator State of optical switches
Solid red One optical switch is activated.
Flashing red More than one optical switch is activated.
B.3 Access and use the display menu system
The display menu system is used to perform various configuration, administrative, and
maintenance tasks.
Tip
The display menu system does not provide complete configuration, administrative, or maintenance
functions. For complete transmitter management, you must use another communications tool.
Prerequisites
To access the display menu system, operator access to either the Offline Maintain menu or
the Alarm menu must be enabled. To access the complete menu system, operator access
must be enabled for both the Offline menu and the Alarm menu.
Procedure
1. If the display screen is locked, activate the Up and Select optical switches
simultaneously to unlock the screen. The display screen automatically locks after
three minutes, if there is no interaction with the screen.
2. At the transmitter display, activate the Select optical switch until the display
changes.
You will enter the Offline Maintain menu at any of several locations, depending on
several factors.
• If an alarm is active and access to the Alarm menu is enabled, you will see Alarm.
• If no alarm is active and Smart Meter Verification is enabled on the transmitter,
you will see Online Verify.
• If no alarm is active and Smart Meter Verification is not enabled on the
transmitter, you will see Offline Maintain.
3. Use the Up, Down, and Select optical switches to navigate to your destination in the
display menu system.
• Use Up or Down to move through a list of options.
• Use Select to choose the current option.
4. If Password appears on the display when you make a choice, enter the value that is
configured for Offline Password.
a. With the cursor flashing on the first digit, activate Up or Down until the correct
digit is displayed, then activate Select.
Using the Chinese-language display
242 Micro Motion
®
Model 1700 Transmitters with Analog Outputs