Filter
Top Products
The default setting for Density Measurement Unit is g/cm3 (grams per cubic centimeter).
Options for Density Measurement Unit
The transmitter provides a standard set of measurement units for Density Measurement Unit.
Different communications tools may use different labels.
Options for Density Measurement UnitTable 4-10:
Unit description
Label
Display (stand-
ard)
Chinese-lan-
guage display
ProLink II ProLink III Field Commu-
nicator
Specific gravity unit (not
temperature-corrected)
SGU SGU SGU SGU SGU
Grams per cubic centime-
ter
G/CM3 g/cm3 g/cm3 g/cm3 g/Cucm
Grams per liter G/L g/L g/l g/l g/L
Grams per milliliter G/mL g/mL g/ml g/ml g/mL
Kilograms per liter KG/L kg/L kg/l kg/l kg/L
Kilograms per cubic me-
ter
KG/M3 kg/m3 kg/m3 kg/m3 kg/Cum
Pounds per U.S. gallon LB/GAL lbs/US gal lbs/Usgal lbs/Usgal lb/gal
Pounds per cubic foot LB/CUF lbs/ft3 lbs/ft3 lbs/ft3 lb/Cuft
Pounds per cubic inch LB/CUI lbs/in3 lbs/in3 lbs/in3 lb/CuIn
API gravity D API deg API degAPI degAPI degAPI
Short ton per cubic yard ST/CUY sTon/yd3 sT/yd3 sT/yd3 STon/Cuyd
4.5.2 Configure slug flow parameters
Display (standard) Not available
Chinese-language
display
Not available
ProLink II • ProLink > Configuration > Density > Slug High Limit
• ProLink > Configuration > Density > Slug Low Limit
• ProLink > Configuration > Density > Slug Duration
ProLink III Device Tools > Configuration > Process Measurement > Density
Field Communicator • Configure > Manual Setup > Measurements > Density > Slug Low Limit
• Configure > Manual Setup > Measurements > Density > Slug High Limit
• Configure > Manual Setup > Measurements > Density > Slug Duration
Configure process measurement
Configuration and Use Manual 45