Filter
Top Products
4. Select.
5. Select again to confirm.
6. Scroll to EXIT.
• To stop all totalizers and inventories using the display:
1. Scroll until the word TOTAL appears in the lower left corner of the display.
Important
Because all totalizers are started or stopped together, it does not matter which total you
use.
2. Select.
3. Scroll until STOP appears beneath the current totalizer value.
4. Select.
5. Select again to confirm.
6. Scroll to EXIT.
8.7 Reset totalizers
Display (standard) See Section 8.7.1.
Chinese-language
display
Offline Maintain > Totalizer Mgmt > Reset Total > Mass Total
Offline Maintain > Totalizer Mgmt > Reset Total > Volume Total
ProLink II ProLink > Totalizer Control > Reset Mass Total
ProLink > Totalizer Control > Reset Volume Total
ProLink > Totalizer Control > Reset Gas Volume Total
ProLink > Totalizer Control > Reset
ProLink III Device Tools > Totalizer Control > Totalizer and Inventories > Reset Mass Total
Device Tools > Totalizer Control > Totalizer and Inventories > Reset Volume Total
Device Tools > Totalizer Control > Totalizer and Inventories > Reset Gas Total
Device Tools > Totalizer Control > Totalizer and Inventories > Reset All Totals
Field Communicator Service Tools > Variables > Totalizer Control > Mass > Mass Total
Service Tools > Variables > Totalizer Control > Gas Standard Volume > Volume Total
Service Tools > Variables > Totalizer Control > Gas Standard Volume > GSV Total
Service Tools > Variables > Totalizer Control > All Totalizers > Reset All Totals
Overview
When you reset a totalizer, the transmitter sets its value to 0. It does not matter whether
the totalizer is started or stopped. If the totalizer is started, it continues to track process
measurement.
Transmitter operation
130 Micro Motion
®
Model 1700 Transmitters with Analog Outputs