Filter
Top Products
Chinese-language display featuresFigure 8-2:
A
C
D
E
F
G
B
A. Process variable
B. Current value of the process variable
C. Scroll up optical switch
D. Scroll down optical switch
E. Select optical switch
F. Unit of measure for process variable
G. Display (LCD panel)
8.2.3 View process variables using ProLink III
When you connect to a device, the process variables are displayed on the main screen of
ProLink III.
Procedure
View the desired process variable(s).
Tip
ProLink III allows you to choose the process variables that appear on the main screen. You can also
choose whether to view data in Analog Gauge view or digital view, and you can customize the gauge
settings. For more information, see the ProLink III user manual.
8.3 View transmitter status using the status LED
The status LED shows the current alarm condition of the transmitter. The status LED is
located on the face of the transmitter.
Observe the status LED.
• If your transmitter has a display, you can view the status LED with the transmitter
housing cover in place.
Transmitter operation
120 Micro Motion
®
Model 1700 Transmitters with Analog Outputs